Language; Window" Menu; Cascade; Tile Vertically - Danfoss VLT 5000 Series Manual

I "LANGUAGE"
If you want to access the "SETTINGS" menu to
change the language, then all dialog windows and
edit windows must be closed. To close these win-
dows click on the close ý icon in the upper right-
hand corner of the open edit or dialog window.
If you desire another language, click on
"SETTINGS" → → → → → "LANGUAGE" and choose from
English and German in the subsequent dialog
field. "EXIT PROGRAM" and start SyncPos again.
56
VLT ® 5000 SyncPos option
I I I I I "WINDOW" menu
You can open several edit windows resp. files and
each edit window can be linked with a controller.
In order to display a number of editing windows
choose between → "CASCADE", "VERTICAL"
(alongside each other) or "HORIZONTAL" (on top of
each other) in the "WINDOWS" menu. . . . .
Click on the full screen symbol, if you do not want
to cascade the windows or display them next to
each other.
In general, if you chose to display files as symbols
they are displayed at the bottom left of the
SyncPos window.
I I I I I "CASCADE"
All opened files are listed in the "WINDOW" menu.
Click on the file that should be on top when the
windows are cascaded.
The files are shown slightly staggered on top of
each other:
File symbol
I I I I I "TILE VERTICALLY"
If you want to look at a number of programs at the
same time you can choose between different
window representations. You can, for example, split
the SyncPos window and display the files along-
side each other.
I I I I I "TILE HORIZONTALLY"
The SyncPos window is divided up and the files
shown on top of each other.
MG.10.J4.02 – VLT is a registered Danfoss trade mark
Full size symbol