Controller" Menu; Programs - Danfoss VLT 5000 Series Manual

I I I I I "CONTROLLER" menu
With the functions in the "CONTROLLER" menu
you can manage your programs: You can save or
delete the programs in the option EEPROM and
can mark a program for autostart. In addition, you
can also set all parameters here and make various
resets and assign a name to every VLT connected.
I I I I I "PROGRAMS"
Click on "CONTROLLER" → → → → → "PROGRAMS" and in
the dialog field you will see all the VLTs in the first
field. The controller marked is the VLT which is
currently linked to the program displayed in the
edit window. Naturally, you can also mark and edit
another VLT.
"PROGRAMS" → "SAVE"
Whenever you run a program, that means load a
program into the controller, it is loaded into a
temporary sector in the RAM, which is overwritten
with each subsequent run. Here you can perma-
nently "SAVE" the last temporary pr
cuted.
MG.10.J4.02 – VLT is a registered Danfoss trade mark
temporary program temporary pr temporary pr temporary pr ogram exe- ogram ogram ogram
®
VLT 5000 SyncPos option
NB!
Don't forget to always save and archive the
program file on the hard drive of the compu-
ter since you can no longer edit the compiled
source file in the VLT.
Click on "SAVE" and enter a name in the subse-
quent dialog field or confirm the file name sugges-
ted. The program number will be assigned automa-
tically.
Click on "SAVE AS" and you can also assign the
program number (0 to 127) yourself, in addition to
the program name.
Using this program number any program can also
be started over the inputs, for example from a PLC.
For this all inputs are to be set accordingly with
"CONTROLLER" → → → → → "PARAMETERS" → → → → →
"GLOBAL".
"SAVE" → "INCLUDE SOURCECODE"
When the check box is activated, the source
coding is protected in VLT, in addition to directly
executable and compiled program files. This can
be re-accessed when necessary and saved in a
file on a PC.
Click on "SAVE AS" and enter a name in the sub-
sequent dialog field or confirm the file name. The
suggested filename contains the date and time to
be safe from overwriting actual files in case of
uploading.
The source coding is saved in Flash EPROM. If
insufficient space is available for the source
coding in Flash EPROM a message is displayed,
and other program files must be erased before
saving the new program file.
All programs saved using source coding are
marked with a '+' sign.
"PROGRAMS" → "START"
In this dialog window you can select a program
and start it directly.
45