Vlt Parameter List - Danfoss VLT 5000 Series Manual

I I I I I VLT parameter list
PNU Parameter
description
700 System control
701 Program number
702 PID, Proportional factor
703 PID, Derivative factor
704 PID, Integral factor
705 PID, Integral bandwidth
706 PID, BANDWIDTH
707 PID, Velocity Feed-forward
708 PID, Acceleration Feed-forward
709 PID, Velocity filter
710 User parameter 10
711 User parameter 11
...
778 User parameter 78
779 User parameter 79
780 Activated dead time compensation
795 User parameter 95 (read only)
796 User parameter 96 (read only)
797 User parameter 97 (read only)
798 User parameter 98 (read only)
799 User parameter 99 (read only)
Changes during operation
"Yes" means that the parameter can be changed, while the VLT frequency converter is in operation. "No"
means that the VLT frequency converter must be stopped before a change can be made.
4-Setup
"Yes" means that the parameter can be programmed individually in each of the four setup's, i.e. the same
parameter can have four different data values. "No" means that the data value will be the same in all four
setup's.
Conversion index
The conversion index is used when transferring parameter values with decimals by means of serial commu-
nication. Conversion index 0 means that the parameter value is multiplied by 1.
Data type
Indicates the data type of the parameter value. Data type 4
Unsigned 16bit. Unsigned 16bit Unsigned 16bit Unsigned 16bit Unsigned 16bit
1) The maximum range is -2
eter in the application program using LINKGPAR or LINKAXPAR.
128
Factory
settings
-1
30
0
0
1000
1000
0
0
0
0
0
0
0
OFF
0
0
0
0
0
Data type 4 is an Integer 32bit Data type 4 Data type 4
Data type 4
32 to 2 32 -1 (-2147483648 to 2147483647) but the actual range is specified when defining a user param-
VLT ® 5000 SyncPos option
Range Changes
during
Operation
0 - 1 Yes
-1 - 127 Yes
0 - 65000 Yes
0 - 65000 Yes
0 - 65000 Yes
0 - 1000 Yes
0 - 65000 Yes
0 - 65000 Yes
0 - 65000 Yes
0 - 65000 Yes
Defined by user 1 Yes
Defined by user 1 Yes
Defined by user 1 Yes
Defined by user 1 Yes
0 - 1 No
Defined by user 1 Read only
Defined by user 1 Read only
Defined by user 1 Read only
Defined by user 1 Read only
Defined by user 1 Read only
Integer 32bit Integer 32bit and data type 6 Integer 32bit
Integer 32bit
MG.10.J4.02 – VLT is a registered Danfoss trade mark
4-Setup Con- Data
version type
index
No 0 6
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
No 0 6
No 0 4
No 0 4
No 0 4
No 0 4
No 0 4
data type 6 data type 6 is an data type 6
data type 6