Danfoss VLT 5000 Series Manual page 38

38
Following chapter describes the individual menus of the SyncPos user interface. If
you are familiar with the Windows interface then, naturally, you can skip the
familiar menus and immediately move to the SyncPos-specific information.
The basic information about program layout, command structure, interrupt,
elements of the programming language, arithmetic and User Unit can be found in
the introduction to the software reference. All commands and parameters are
described in detail and then alphabetically ordered in the chapters Software
Reference and Parameter Reference.
VLT ® 5000 SyncPos option
MG.10.J4.02 – VLT is a registered Danfoss trade mark