Transition Time - Sharp MX-3610N User Manual

When the power supply of the machine was off, there was no job during this
time.
Transition to Energy Saving and Auto Power Shut-Off modes
Pattern
Mode1 (Job Start Priority1)
Mode2 (Job Start Priority2)
Mode3 (Energy Saving
Priority1)
Mode4 (Energy Saving
Priority2)
* Factory default setting
Auto
This function controls the power optimally for each time period by analyzing the use of
machine based on job logs obtained during a certain time period.
If the machine does not have the 4-week job log information, the machine enters
the template2 (Mode3 (Energy Saving Priority1) between 8:00 and 18:00 hours).
Then after that, it enters Mode4 (Energy Saving Priority2).
Manual
You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to
the "Original Eco Patterns 1 to 4".
Three-pattern template
Template
Template 1
Template 2
Template 3

Transition time

After 1 hour
After 30 minutes
After 5 minutes
After the minimum time
period
Pattern
All "Energy Save Priority 2"
8:00-18:00 "Energy Save
Priority 1"
8:00-18:00 "Job Start Priority
1"
Average outputs per
*
hour
500 or more
100 to 499
20 to 99
Up to 19
Description of mode
The machine runs in the
"Mode4 (Energy Saving
Priority2)" all the time.
The machine runs in "Mode3
(Energy Saving Priority1)"
between 8:00 and 18:00, and
in "Mode4 (Energy Saving
Priority2)" at other times.
The machine runs in "Mode1
(Job Start Priority1)" between
8:00 and 18:00, and in
"Mode4 (Energy Saving
Priority2)" at other times.