Configuring Proxy Arp - Alcatel-Lucent 7750 SR OS Configuration Manual

Common Configuration Tasks

Configuring Proxy ARP

To configure proxy ARP, you can configure:
•
•
•
CLI Syntax: config>router# policy-options
The following example displays prefix list configuration command usage. These commands are
configured in the
Example:config>router>policy-options# begin
through 32
through 32
Page 68
A prefix list in the
config>router>policy-options>prefix-list
A route policy statement in the
context and apply the specified prefix list.
statement
→ In the policy statement
which ARP requests can or cannot be forwarded to non-local networks, depending on
the specified action.
→ In the policy statement
requests will or will not be forwarded to depending on the action if a match is found.
For more information about route policies, refer to
Apply the policy statement to the proxy-arp configuration in the
config>router>interface
begin
commit
prefix-list name
prefix ip-prefix/mask [exact|longer|through
length|prefix-length-range length1-length2]
config>router
config>router>policy-options# prefix-list prefixlist1
config>router>policy-options>prefix-list# prefix 10.20.30.0/24
config>router>policy-options>prefix-list# exit
config>router>policy-options# prefix-list prefixlist2
config>router>policy-options>prefix-list# prefix 10.10.10.0/24
config>router>policy-options>prefix-list# exit
config>router>policy-options# commit
config>router>policy-options>policy-
context, specify the host source address(es) for
entry>to
context, specify network prefixes that ARP
entry>from
context.
context.
7750 SR OS Router Configuration Guide
context.
Route Policies on page 597.