Acl Filter Policy Commands - Alcatel-Lucent 7750 SR-OS Configuration Manual

ACL Filter Policy Commands

default-action
Syntax default-action {drop | forward}
Context config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Description
This command specifies the action to be applied to packets when the packets do not match the
specified criteria in all of the IP filter entries of the filter.
When multiple default-action commands are entered, the last command will overwrite the previous
command.
Default
drop
Parameters
drop — Specifies all packets will be dropped unless there is a specific filter entry which causes the
forward — Specifies all packets will be forwarded unless there is a specific filter entry which causes
embed-filter
Syntax embed-filter filter-id [offset offset] [{active | inactive}]
no embed-filter filter-id
Context config>filter>ip-filter
config>filter>ipv6-filter
Description
This command embeds a previously defined IPv4, or IPv6 embedded filter policy into this exclusive
or template filter policy at a specified offset value.
active | inactive keywords:
active – an embedded filter entries are to be included in this embedding filter policy and activated on
applicable line cards – default if no keyword is specified and omitted in info command (but not info
detail), or when saving configuration
inactive – an embedded filter policy entries are to be included in this embedded filter policy but are
not downloaded to line cards – i.e. remain inactive. Always shown as part of info command or when
saved to a configuration file.
The no form of this command removes the embedded filter policy from this filter policy.
Please see the description of embedded filter policies in this guide for further operational details.
Default
No embedded filter policies are included in a filter policy by default
7750 SR OS Router Configuration Guide
packet to be forwarded.
the packet to be dropped.
Filter Policies
Page 489