From a Network Interface
To delete a filter from a network interface, enter the following CLI commands:
CLI Syntax: config>router# interface ip-int-name
Example
From the Filter Configuration
After you have removed the filter from the SAP, use the following CLI syntax to delete the filter.
CLI Syntax: config>filter# no ip-filter filter-id
CLI Syntax: config>filter# no mac-filter filter-id
Example
13
7450 ESS OS Router Configuration Guide
ingress
no filter
:
config>router# interface 11
config>router>if# shutdown
config>filter>if# exit
config>filter# no interface 11
:
config>filter# no ip-filter 11 config>filter# no mac-filter
Filter Policies
Page 351