Configuring The Port Parameters For 802.1Q Vlan - TP-Link T1500-28PCT User Manual

Hide thumbs Also See for T1500-28PCT:

Table of Contents

Configuring 802.1Q VLAN

Untagged port

3) Click Apply.

2.1.2 Configuring the Port Parameters for 802.1Q VLAN

Choose the menu L2 FEATURES > VLAN > 802.1Q VLAN > Port Config to load the

following page.

Figure 2-1 Configuring the Port

Select a port and configure the parameters. Click Apply.

Ingress Checking

Acceptable Frame

The selected ports will forward untagged packets in the target VLAN.

The selected ports will forward tagged packets in the target VLAN.

Set the default VLAN ID of the port. Valid values are from 1 to 4094. It is used

mainly in the following two ways:

When the port receives an untagged packet, the switch inserts a VLAN tag to the

packet based on the PVID.

Enable or disable Ingress Checking. With this function enabled, the port will

accept the packet of which the VLAN ID is in the port's VLAN list and discard

others. With this function disabled, the port will forward the packet directly.

Select the acceptable frame type for the port and the port will perform this

operation before Ingress Checking.

Admit All: The port will accept both the tagged packets and the untagged

Tagged Only: The port will accept the tagged packets only.

802.1Q VLAN Configuration

Configuration Guide