Set The Print Job Default Settings - Canon ColorWave 3800 Operation Manual

Set the print job default settings

Set the print job default settings
In WebTools Express you can configure the default values for the print job settings.
The print job settings are grouped under the [Preferences] - [Print job defaults] tab. You can find a
short explanation of the most important print job default settings below. Under the print job
default settings you can also define the print presets that are visible on the user panel. For more
information on the print presets, see
NOTE
When you define print job settings in the printer drivers or the job submission tools, these
values always overrule the default values defined in WebTools Express.
Overview of the [Print job defaults] - [Basic] settings
Open the [Preferences] - [Print job defaults] tab. Go to [Basic] and click edit in the upper right
hand corner.
Setting
[Number of sets]
[Collate]
[Print delivery]
[Color mode]
Overview of the [Print job defaults] - [Sheet] settings
Open the [Preferences] - [Print job defaults] tab. Go to [Sheet] and click Edit in the upper right-
hand corner.
Setting
[Media source]
70 Chapter 3 - Define your workflow with WebTools Express
Set the default print preset on page
Description
Enter the default value for the number of times you want your
jobs to be printed.
• Select [On (sort by set)] to sort your output by set (123 - 123).
• Select [Off (sort by page)] to sort your output by page (11 - 22 -
33).
• Select [Top Delivery Tray (TDT)] to default deliver your output
in the Top Delivery Tray.
• Select [Back output] to default deliver your output at the back of
the printer.
• Select [Color] to default print in color.
• Select [Grayscale] to default print in greyscale.
Description
Select the default output material and format for the media used
on the printer.
• Select [Automatic] to automatically select the media.
• Select the specific roll number of the media you want to use by
default.
The system screen on the printer user panel displays the loaded
rolls.
NOTE
You can only configure the Media selection policy set-
ting, when Media source is set to [Automatic].
107.
4