YASKAWA SGD7S Product Manual page 9

 Notation Used in this Manual
 Notation for Reverse Signals
The names of reverse signals (i.e., ones that are valid when low) are written with a forward slash (/)
before the signal abbreviation.
Notation Example
BK is written as /BK.
 Notation for Parameters
The notation depends on whether the parameter requires a numeric setting (parameter for numeric
setting) or requires the selection of a function (parameter for selecting functions).
•
Parameters for Numeric Settings
Speed Loop Gain
Pn100
Setting Range
10 to 20,000
Parameter
number
This is the setting range
for the parameter.
•
Parameters for Selecting Functions
Parameter
n. 0
(default setting)
Pn002 n. 1
n. 2
Parameter
The notation "n.
number
Each
The notation shown here means that the third digit from the right is set to 2.
The following format is used to show the individual bits of a parameter
setting: b.
The individual bits of a parameter setting have specific meanings, but you
cannot set the bits individually. The individual bits must be converted to a
hexadecimal value to set a parameter.
Refer to the following section for details on settings.
Notation Example
Notation Examples for Pn002
n . 0 0 0 0
Notation
Pn002 =
n.
Pn002 =
n.
Pn002 =
n. X
Pn002 =
n.X
 Engineering Tools Used in This Manual
This manual uses the interfaces of the SigmaWin+ for descriptions.
Setting Unit
0.1 Hz
This is the minimum
This is the
unit (setting increment)
parameter setting
that you can set for
before shipment.
the parameter.
Use the encoder according to encoder specifications.
Use the encoder as an incremental encoder.
Use the encoder as a single-turn absolute encoder.
" indicates a parameter for selecting functions.
indicates the setting for one digit.
15.1.2 List of Parameters (page 15-3)
Digit Notation
Meaning
Indicates the first digit from
X the right in Pn002.
Indicates the second digit
X from the right in Pn002.
Indicates the third digit from
the right in Pn002.
Indicates the fourth digit from
the right in Pn002.
Default Setting When Enabled
400 Immediately
This is when any
change made to the
parameter will
become effective.
Meaning
.
Numeric Value Notation
Notation
Pn002 =
Indicates that the first digit from
n. 1
the right in Pn002 is set to 1.
Pn002 =
Indicates that the second digit from
n. 1
the right in Pn002 is set to 1.
Pn002 =
Indicates that the third digit from
n. 1 the right in Pn002 is set to 1.
Pn002 =
Indicates that the fourth digit from
n.1 the right in Pn002 is set to 1.
Classification
Tuning
This is the parameter
classification.
When Enabled Classification
After startup Setup
This column explains the
selections for the function.
Meaning
ix