YASKAWA SGD7S Product Manual page 459

Alarm Number:
Possible Cause
Alarm Name
Noise entered on the
signal line from the
encoder.
Excessive vibration or
shock was applied to
the encoder.
A.C92:
Encoder Commu-
A failure occurred in
nications Timer
the encoder.
Error
A failure occurred in
the SERVOPACK.
A failure occurred in
the encoder.
A.CA0:
Encoder Parame-
ter Error
A failure occurred in
the SERVOPACK.
Confirmation
Implement countermea-
– sures against noise for the
encoder wiring.
Reduce machine vibra-
Check the operating tion.
conditions. Correctly install the Ser-
vomotor or linear encoder.
Turn the power supply to
the SERVOPACK OFF and
ON again. If an alarm still
– occurs, the Servomotor or
linear encoder may be
faulty. Replace the Servo-
motor or linear encoder.
Turn the power supply to
the SERVOPACK OFF and
ON again. If an alarm still
–
occurs, the SERVOPACK
may be faulty. Replace the
SERVOPACK.
Turn the power supply to
the SERVOPACK OFF and
ON again. If an alarm still
– occurs, the Servomotor or
linear encoder may be
faulty. Replace the Servo-
motor or linear encoder.
Turn the power supply to
the SERVOPACK OFF and
ON again. If an alarm still
–
occurs, the SERVOPACK
may be faulty. Replace the
SERVOPACK.
14.2 Alarm Displays
14.2.2 Troubleshooting Alarms
Continued from previous page.
Correction Reference
page 4-6
–
–
–
–
–
Continued on next page.
14
14-33