YASKAWA SGD7S Product Manual page 141

8.
Click the OK Button.
If DeviceNet Module parameters are displayed, go to step 9. If only SERVOPACK param-
Information
eters are displayed, go to step 11.
 Write data to flash memory only when the mechanical system is stopped.
If you write data to flash memory while the mechanical system is operating, processing that is being
executed will be interrupted and the mechanical system may stop.
9.
Click the Write to Flash Button in the Parameter Editing Dialog Box.
DANGER
5.1 Manipulating Parameters (Pn)
5.1.3 Parameter Setting Methods
5
5-7