Table of Contents
Advertisement
D-Link DGS-1100-10/ME User Manual
QoS > Bandwidth Control
The Bandwidth Control page allows network managers to define the bandwidth settings for a specified port's
transmitting and receiving data rates.
From Port / To Port: Select a range of ports to be configured.
Type: Select RX (receive), TX (transmit), or Both. This setting will determine whether the bandwidth ceiling
is applied to receiving, transmitting, or both receiving and transmitting packets.
No Limit: Select Enabled to remove any bandwidth limit on the selected port range. Select Disabled and
enter a bandwidth rate limit.
Rate (16-1000000): If you selected Disabled from the No Limit drop-down menu, enter the data rate, in Kbits
per second, will be the limit for the selected port. The value is between 16 and 1000000.
Click Apply for the settings to take effect.
QoS > QoS Settings
QoS is an implementation of the IEEE 802.1p standard that allows you to reserve bandwidth for important
functions that require a larger bandwidth or that might have a higher priority, such as VoIP (voice-over
Internet Protocol), web browsing applications, file server applications or video conferencing. Thus with larger
bandwidth, less critical traffic is limited, and therefore excessive bandwidth can be saved.
Figure 4.83 – QoS > Bandwidth Control
NOTE: The TX rate for Gigabit ports can only be
configured in multiples of 1850kbps. If any other
value is used, the system automatically rounds it
down to the lower multiple of 1850.
Figure 4.84 - QoS > QoS Settings
5
5
3
3
Hide quick links:
Advertisement
Table of Contents
