802.1P Map Settings; Bandwidth Control; Bandwidth Control Settings - D-Link xStack DES-3200 Series Reference Manual

Click the Apply button to accept the changes made.

802.1p Map Settings

This window is used to the mapping of 802.1p to the packet's initial color.
To view the following window, click QoS > 802.1p Settings > 802.1p Map Settings, as show below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Priority (0-7)
Color
Click the Apply button to accept the changes made.

Bandwidth Control

The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any
selected port.

Bandwidth Control Settings

The Effective RX/TX Rate refers to the actual bandwidth of the switch port, if it does not match the configured rate.
This usually means that the bandwidth has been assigned by a higher priority resource, such as a RADIUS server.
To view the following window, click QoS > Bandwidth Control > Bandwidth Control Settings, as show below:
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 6-4 802.1p Map Settings window
Description
Select the starting and ending ports to use.
Enter the list of source priority for incoming packets.
Select the mapped color for a packet. The default is green.
125