Installing The Replacement Power Supply - VERITAS 5150 Manual
Hardware service procedure
Hide thumbs
Also See for 5150:
- Product description manual (36 pages) ,
- Hardware installation manual (36 pages) ,
- Hardware service procedure (5 pages)
Advertisement
Warning: Swap one power supply at a time only. If you need to remove both power supplies,
make sure the appliance is turned off before you proceed.
5
Press in and hold the green release lever on the right side of the power supply to release the
module.
6
Grasp the handle and pull the power supply out of the slot.
Caution: The power supply may be hot. Be careful when handling the unit.
Installing the replacement power supply
Use the following procedure to install the replacement power supply
To install the replacement power supply
1
Remove the replacement power supply from any wrapping.
2
Insert the power supply into a power supply slot.
QRB # 298: Replacing a power supply
4
Advertisement
