Siemens Hicom Office PhoneMail Installation And System Administrator's Manual page 114

inst_check.fm
Installation Checklist
3. Name Office PhoneMail Stations
Using Hicom CS administration, enter the station name "VM1 and VM2" for subscriber ex-
tensions connected to PhoneMail.
Use the following order:
Up connection 1 — Master — VM1 Slave — VM2
0E
Up connection 2 — Master — VM3 Slave — VM4
0E
In four-port installations subscriber extensions for ports 3 and 4 are named "VM3" and
"VM4".
Flight Path: Hicom 118 CS Admin - 1312
Flight Path: Hicom 150 CS Admin - 1412
4. Set Intrusion Ability (Busy Override) on Office PhoneMail Extensions
Using Hicom CS administration, set the "Intrusion Ability" or "Busy Override" for all exten-
sions connected to Office PhoneMail to "Denied".
Flight Path: Hicom 118 CS Admin - 1313 (Intrusion Ability)
Flight Path: Hicom 150 CS Admin - 1413 (Busy Override)
5. Set HICOM switch Simplified Dialing
Using Hicom CS administration, set the "Simplified Dialing" parameter.
Flight Path: Hicom 118 CS Admin - 1611
Flight Path: Hicom 150 CS Admin - 1711
6. Set Data Line Security on Office PhoneMail Extensions
Using Hicom CS administration, set the "Data Line Security" for all extensions connected
to the Office PhoneMail unit to "ON".
Flight Path: Hicom 118 CS Admin - 1315
Flight Path: Hicom 150 CS Admin - 1416
7. Assign Office PhoneMail Extensions to a Call Management Group (Hunt/Group
Call)
Using Hicom CS administration, add all extensions connected to Office PhoneMail to an
available Call Group. Add the extensions in the following order: VM1, VM2, VM3 and VM4
C-2
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide
,
G281-0507-00 April 15, 1998