Getting To Know Office Phonemail - Siemens Hicom Office PhoneMail Installation And System Administrator's Manual

lleg_sa.c04
Getting Started

Getting to Know Office PhoneMail

Figure 4-1 The Office PhoneMail Unit
Power Connector
Plug Office PhoneMail power cord in here.
Digital Station Connectors
You will connect one end of a supplied 6' modular cable into these connectors and the other
end into the digital station connector on the Hicom. One cable is required for each two sta-
tion ports.
If your Office PhoneMail is configured with two ports, use the digital station connector near-
est to the power connector.
If your Office PhoneMail is configured with four ports, you will use another cable supplied
with the 4-port upgrade card.
4-2
Digital Station
Connectors
Power Connector
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide
Status Indicator
RS-232
Connector
Expansion
Card Slot
Diagnostic
Button
,
G281-0507-00 April 15, 1998