Activating System Programming Mode - Siemens HiPath 1100 Series Programming Manual

Step by Step
Description
External line
Extension, including S
Groups of external lines
Call Groups (CG)
Hunt Groups (HG)
UCD Subscriber Groups
USB/CAPI line
Numbering Plan:
HiPath 1120 HiPath 1130 HiPath 1150 HiPath 1190
801 to 806
11 to 30
0
10
The instructions that follow refer to the factory default
settings.

Activating System Programming Mode

We recommend using a system telephone with a
display. If this is not possible, you may use a standard MF
telephone. Programming cannot be executed using a
pulse dialing telephone.
Standard telephones v. system telephones:
The step by step instructions on how to program
a system are based on a standard telephone. If
you are using a system telephone consider the
following:
g
j
Lift the handset at the programmer's extension slot.
* Enter the code for activating the System Programming.
9 5
Enter the system password (default is 31994 - Changing
system password
You will hear a tone indicating that you have now
accessed the Programming Mode.
801 to 817
11 to 60
610 to 621 610 to 645
0
890 to 899
770 to 779
780 to 789
790 to 799
10
SPEAKER = HOOK
FEATURE = (Service)
*
page 88).
Programming Mode
801 to 845
11 to 60 101 to 240
100
15