Display Ssl Server-Policy - HP 5120 SI series Command Reference Manual

Table 38 Output description
Field
SSL Client Policy
SSL Version
PKI Domain
Prefer Ciphersuite
Server-verify

display ssl server-policy

Syntax
display ssl server-policy { policy-name | all } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
policy-name: SSL server policy name, a case-insensitive string of 1 to 16 characters.
all: Displays information about all SSL server policies.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display ssl server-policy command to view information about a specified SSL server policy or all
SSL server policies.
Examples
# Display information about SSL server policy policy1.
<Sysname> display ssl server-policy policy1
SSL Server Policy: policy1
PKI Domain: domain1
Ciphersuite:
RSA_RC4_128_MD5
RSA_RC4_128_SHA
RSA_DES_CBC_SHA
RSA_3DES_EDE_CBC_SHA
Description
SSL client policy name
Version of the protocol used by the SSL client policy,
SSL 3.0 or TLS 1.0
PKI domain of the SSL client policy
Preferred cipher suite of the SSL client policy
Whether server authentication is enabled for the SSL
client policy
274