Dot1X Max-User - HP 5120 SI series Command Reference Manual

View
Layer 2 Ethernet Interface view
Default level
2: System level
Parameters
domain-name: Specifies the ISP domain name, a case insensitive string of 1 to 63 characters. The
specified domain must already exist.
Description
Use the dot1x mandatory-domain command to specify a mandatory 802.1X authentication domain on
a port.
Use the undo dot1x mandatory-domain command to remove the mandatory authentication domain.
By default, no mandatory authentication domain is specified.
When authenticating an 802.1X user trying to access the port, the system selects an authentication
domain in the following order: the mandatory domain, the ISP domain specified in the username, and
the default ISP domain.
To display or cut all 802.1X connections in a mandatory domain, use the display connection domain
isp-name or cut connection domain isp-name command. The output of the display connection command
without any parameters displays domain names input by users at login. For more information about the
display connection command or the cut connection command, see the chapter "AAA configuration
commands."
Related commands: display dot1x.
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x mandatory-domain my-domain
# After 802.1X user usera passes authentication, execute the display connection command to display the
user connection information on GigabitEthernet 1/0/1. For more information about the display
connection command, see the chapter "AAA configuration commands."
[Sysname-GigabitEthernet1/0/1] display connection interface gigabitethernet 1/0/1
Index=68
MAC=0015-e9a6-7cfe
IP=3.3.3.3
IPv6=N/A
Total 1 connection(s) matched.

dot1x max-user

Syntax
In system view:
dot1x max-user user-number [ interface interface-list ]
,Username=usera@my-domian
103