authorization portal
Syntax
authorization portal { local | none | radius-scheme radius-scheme-name [ local ] }
undo authorization portal
View
ISP domain view
Default level
2: System level
Parameters
local: Performs local authorization.
none: Does not perform any authorization exchange. In this case, an authenticated portal user can
access the network directly.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the authorization portal command to configure the authorization method for portal users.
Use the undo authorization portal command to restore the default.
By default, the default authorization method for the ISP domain is used for portal users.
The specified RADIUS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Related commands: local-user, authorization default, and radius scheme.
Examples
# Configure ISP domain test to use local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# Configure ISP domain test to use RADIUS scheme rd for authorization of portal users and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
authorization-attribute user-profile
Syntax
authorization-attribute user-profile profile-name
undo authorization-attribute user-profile
15