Mac-Authentication - HP 5120 SI series Command Reference Manual

Field
Silent Mac User info
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Max number of on-line users
Current online user number
MAC Addr
Authenticate state
AuthIndex

mac-authentication

Syntax
In system view:
mac-authentication [ interface interface-list ]
undo mac-authentication [ interface interface-list ]
In Layer 2 Ethernet interface view:
mac-authentication
undo mac-authentication
View
System view, Layer 2 Ethernet interface view
Default level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type interface-number
[ to interface-type interface-number ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10
Description
Information about silent MAC addresses. A MAC
address is marked silent when it fails a MAC
authentication, and at the same time, a quiet timer starts.
Before the timer expires, the device drops any packet
from the MAC address and does not perform MAC
authentication for the MAC address.
Status of the link on port GigabitEthernet 1/0/1. In this
example, the link is up.
Whether MAC authentication is enabled on port
GigabitEthernet 1/0/1
MAC authentication statistics, including the number of
successful and unsuccessful authentication attempts
Maximum number of concurrent online users allowed on
the port
If MAC authentication is not enabled on the port, the field
displays 0.
Number of online users on the port.
MAC address of the online user.
User status. Possible values including the following:
•
CONNECTING—The user is logging in.
•
SUCCESS—The user has passed the authentication.
•
FAILURE—The user failed the authentication.
•
LOGOFF—The user has logged off.
Authenticator Index
118