Portal Web-Proxy Port - HP 5120 SI series Command Reference Manual

retry retries: Specifies the maximum number of consecutive failed checks. The retries argument ranges
from 1 to 5 and defaults to 4. If the access device finds that one of its users does not exist in the user
synchronization packets from the portal server within N consecutive probe intervals (N = retries), it
considers that the user does not exist on the portal server and logs the user off.
Description
Use the portal server user-sync command to configure portal user information synchronization with a
specific portal server. With this function configured, the device periodically checks and responds to the
user synchronization packet received from the specified portal server, so as to keep the consistency of the
online user information on the device and the portal server.
Use the undo portal server user-sync command to cancel the portal user information synchronization
configuration with the specified portal server.
By default, the portal user synchronization function is not configured.
The user information synchronization function requires that a portal server supports the portal user
heartbeat function (currently only the iMC portal server supports portal user heartbeat). To implement the
portal user synchronization function, you also need to configure the user heartbeat function on the portal
server and make sure that the user heartbeat interval configured on the portal server is shorter than or
equal to the synchronization probe interval configured on the device.
Deleting a portal server on the device will delete the portal user synchronization configuration with the
portal server.
If you configure the user synchronization function for a portal server for multiple times, the last
configuration takes effect. If you do not specify an optional parameter, the default setting of the
parameter is used.
For redundant user information on the device—information of the users considered as nonexistent on the
portal server, the device deletes the information during the (N+1)th probe interval, where N equals to the
value of retries configured in the portal server user-sync command.
Examples
# Configure the device to synchronize portal user information with portal server pts:
Setting the synchronization probe interval to 600 seconds
•
Specifying the device to log off users if information of the users does not exist in the user
•
synchronization packets sent from the server in two consecutive probe intervals.
<Sysname> system-view
[Sysname] portal server pts user-sync interval 600 retry 2

portal web-proxy port

Syntax
portal web-proxy port port-number
undo portal web-proxy port { port-number | all }
View
System view
Default level
2: System level
159