Step
3.
Set a password
for the user
account.
4.
Assign FTP
service to the user
account
5.
Configure
authorization
attributes.
For
more
authorization-attribute commands, see Security Command Reference.
Associating an SSL server policy with the FTP service
For two devices that support secure FTP, you can associate an SSL server policy with the FTP
service on the FTP server. Then, the FTP connection will be established over an SSL connection.
Before associating an SSL server policy with the FTP service, you must create the policy and disable
FTP server.
To associate an SSL server policy with the FTP service:
Step
1.
Enter system view.
2.
Associate an SSL server
policy with the FTP service.
FTP server configuration example
Network requirements
Create a local user account with the username abc and password abc and enable FTP server on the
device in
Figure
file newest.bin from the FTP client to the FTP server, and download the configuration file config.cfg
from the FTP server to the FTP client for backup.
Figure 28 Network diagram
Configuration procedure
1.
Configure the device (FTP server):
Command
password { simple | cipher }
password
service-type ftp
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut minute
| level level | user-profile
profile-name | user-role { guest |
guest-manager |
security-audit } | vlan vlan-id |
work-directory directory-name }
*
information
about
Command
system-view
ftp server ssl-server-policy
policy-name
28. Use the user account to log in to the FTP server from the FTP client, upload the
Remarks
N/A
By default, no service type is specified. If the
FTP service is specified, the root directory of
the device is by default used.
Optional.
By default, the FTP users can access the
root directory of the device, and the user
level is 0. You can change the default
configuration by using this command.
the
local-user,
password,
72
service-type
Remarks
N/A
Optional.
By default, no SSL server policy is
associated with the FTP service.
ftp,
and
Need help?
Do you have a question about the 3100 v2 Series and is the answer not in the manual?