HP 5120 SI series Command Reference Manual page 141

Default level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal connection statistics command to display portal connection statistics on a specific
interface or all interfaces.
Examples
# Display portal connection statistics on interface GigabitEthernet1/0/1.
<Sysname> display portal connection statistics interface gigabitethernet1/0/1
---------------Interface: GigabitEthernet1/0/1-----------------------
User state statistics:
State-Name
VOID
DISCOVERED
WAIT_AUTHEN_ACK
WAIT_AUTHOR_ACK
WAIT_LOGIN_ACK
WAIT_ACL_ACK
WAIT_NEW_IP
WAIT_USERIPCHANGE_ACK
ONLINE
WAIT_LOGOUT_ACK
WAIT_LEAVING_ACK
Message statistics:
Msg-Name
MSG_AUTHEN_ACK
MSG_AUTHOR_ACK
MSG_LOGIN_ACK
MSG_LOGOUT_ACK
MSG_LEAVING_ACK
MSG_CUT_REQ
MSG_AUTH_REQ
MSG_LOGIN_REQ
MSG_LOGOUT_REQ
MSG_LEAVING_REQ
User-Num
0
0
0
0
0
0
0
0
1
0
0
Total Err
3 0
3 0
3 0
2 0
0 0
0 0
3 0
3 0
2 0
0 0
130
Discard
0
0
0
0
0
0
0
0
0
0