Display Ike Proposal - HP 5120 SI series Command Reference Manual

<Sysname> display ike peer
---------------------------
IKE Peer: aaa
exchange mode: main on phase 1
peer id type: ip
peer ip address: 0.0.0.0 ~ 255.255.255.255
local ip address:
peer name:
nat traversal: disable
dpd:
---------------------------
Table 56 Output description
Field
exchange mode
pre-shared-key
peer id type
peer ip address
local ip address
peer name
nat traversal
dpd

display ike proposal

Syntax
display ike proposal [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ike proposal command to view the settings of all IKE proposals.
Description
IKE negotiation mode in phase 1
Pre-shared key used in phase 1
ID type used in phase 1
IP address of the remote security gateway
IP address of the local security gateway
Name of the remote security gateway
Whether NAT traversal is enabled
Name of the peer DPD detector
355