Display Stop-Accounting-Buffer; Hwtacacs Nas-Ip - HP 5120 SI series Command Reference Manual

display stop-accounting-buffer

Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ slot slot-number ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a string of 1
to 32 characters.
slot slot-number: Specifies the member number of the device in the IRF virtual device, which you can
display with the display irf command. The value range for the slot-number argument depends on the
number of members and numbering conditions in the current IRF virtual device. If no IRF virtual device
exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device.
Related commands: reset stop-accounting-buffer, stop-accounting-buffer enable, and retry
stop-accounting.
Examples
# Display information about the buffered stop-accounting requests for HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Slot 1:
Total 0 record(s) Matched

hwtacacs nas-ip

Syntax
hwtacacs nas-ip ip-address
undo hwtacacs nas-ip ip-address
View
System view
74