HP 5120 SI series Command Reference Manual page 83

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display hwtacacs command to display the configuration information or statistics of HWTACACS
schemes.
If no HWTACACS scheme is specified, the command will display the configuration information of all
HWTACACS schemes.
If no slot number is specified, the command will display the configuration information of the HWTACACS
scheme on the main processing unit.
If no IRF member ID is specified, the command will display the configuration information of the
HWTACACS schemes on all members of an IRF virtual device.
Related commands: hwtacacs scheme.
Examples
# Display configuration information about HWTACACS scheme gy.
<Sysname> display hwtacacs gy
HWTACACS scheme name : gy
Primary Authen Server:
IP: 10.1.1.2
Encryption Key : ******
Secondary Authen Server:
IP: 20.1.1.2
Encryption Key : ******
Primary Author Server:
IP: 10.1.1.3
Encryption Key : ******
Secondary Author Server:
IP: 20.1.1.3
Encryption Key : ******
Primary Account Server:
IP: 10.1.1.1
Encryption Key : ******
Secondary Account Server:
IP: 20.1.1.1
Encryption Key : ******
NAS IP address
Authentication key
Authorization key
Accounting key
Quiet interval(min)
Realtime accounting interval(min)
Response timeout interval(sec)
Retransmission times of stop-accounting packet : 100
Username format
Data flow unit
Port: 49
Port: 49
Port: 49
Port: 49
Port: 49
Port: 49
: Not configured
: Not configured
: Not configured
: Not configured
: 5
: 12
: 5
: with-domain
: Byte
72
State: Active
State: Active
State: Active
State: Active
State: Active
State: Active