Authentication Super - HP 5120 SI series Command Reference Manual

Hide thumbs Also See for 5120 SI series:
Table of Contents

Advertisement

none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the authentication portal command to configure the authentication method for portal users.
Use the undo authentication portal command to restore the default.
By default, the default authentication method for the ISP domain is used for portal users.
The specified RADIUS scheme must have been configured.
Related commands: authentication default and radius scheme.
Examples
# Configure ISP domain test to use local authentication for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal local
# Configure ISP domain test to use RADIUS scheme rd for authentication of portal users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal radius-scheme rd local

authentication super

Syntax
authentication
radius-scheme-name }
undo authentication super
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
case-insensitive string of 1 to 32 characters.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a case-insensitive
string of 1 to 32 characters.
Description
Use the authentication super command to configure the authentication method for user privilege level
switching.
Use the undo authentication super command to restore the default.
By default, the default authentication method for the ISP domain is used for user privilege level switching
authentication.
super
{
hwtacacs-scheme
hwtacacs-scheme-name
10
|
radius-scheme

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents