Public-Key Local Export Rsa - HP 5120 SI series Command Reference Manual

public-key local export rsa

Syntax
In non-FIPS mode:
public-key local export rsa { openssh | ssh1 | ssh2 } [ filename ]
In FIPS mode:
public-key local export rsa { openssh | ssh2 } [ filename ]
View
System view
Default level
2: System level
Parameters
openssh: Uses the format of OpenSSH.
ssh1: Uses the format of SSH1.5.
ssh2: Uses the format of SSH2.0.
filename: Specifies the name of the file for storing the host public key. For more information about file
name, see the Fundamentals Configuration Guide.
Description
Use the public-key local export rsa command to display the local RSA host public key on the screen or
export it to a specified file.
If you specify the filename argument, the command exports the local RSA public key to the specified file
and saves the file. Otherwise, the command displays the local RSA host public key on the screen.
SSH1, SSH2.0, and OpenSSH are three different public key formats for different requirements.
Related commands: public-key local create and public-key local destroy.
Examples
# Export the local RSA host public key in OpenSSH format to a file named key.pub.
<Sysname> system-view
[Sysname] public-key local export rsa openssh key.pub
# Display the local RSA host public key in SSH2.0 format.
<Sysname> system-view
[Sysname] public-key local export rsa ssh2
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "rsa-key-20110125"
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDAo0dVYR1S5f30eLKGNKuqb5HU3M0TTSaGlER2GmcRI2sgSegbo1x6u
t5NIc5+jJxuRCU4+gMc76iS8d+2d50FqIweEkHHkSG/ddgXt/iAZ6cY81bdu/CKxGiQlkUpbw4vSv+X5KeE7j
+o0MpOpzh3W768/+u1riz+1LcwVTs51Q==
---- END SSH2 PUBLIC KEY ----
# Display the local RSA host public key in OpenSSH format.
<Sysname> system-view
[Sysname] public-key local export rsa openssh
211