Pki Certificate Attribute-Group; Pki Delete-Certificate - HP 5120 SI series Command Reference Manual

Description
Use the pki certificate access-control-policy command to create a certificate attribute-based access
control policy and enter its view.
Use the undo pki certificate access-control-policy command to remove one or all certificate
attribute-based access control policies.
No access control policy exists by default.
Examples
# Configure an access control policy named mypolicy and enter its view.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy]

pki certificate attribute-group

Syntax
pki certificate attribute-group group-name
undo pki certificate attribute-group { group-name | all }
View
System view
Default level
2: System level
Parameters
group-name: Specifies a name for the certificate attribute group, a case-insensitive string of 1 to 16
characters. It cannot be a, al, or all.
all: Specifies all certificate attribute groups.
Description
Use the pki certificate attribute-group command to create a certificate attribute group and enter its view.
Use the undo pki certificate attribute-group command to delete one or all certificate attribute groups.
By default, no certificate attribute group exists.
Examples
# Create a certificate attribute group named mygroup and enter its view.
<Sysname> system-view
[Sysname] pki certificate attribute-group mygroup
[Sysname-pki-cert-attribute-group-mygroup]

pki delete-certificate

Syntax
pki delete-certificate { ca | local } domain domain-name
View
System view
231