HP 5120 SI series Command Reference Manual page 136

Parameters
interface interface-list: Specifies a port list, in the format of { interface-type interface-number [ to
interface-type interface-number ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10 port
ranges. The start port and end port of a port range must be of the same type and the end port number
must be greater than the start port number. A port range defined without the to interface-type
interface-number portion comprises only one port.
Description
Use the reset mac-authentication statistics command to clear MAC authentication statistics.
If no port list is specified, the command clears all global and port-specific MAC authentication statistics.
If a port list is specified, the command clears the MAC authentication statistics on the specified ports.
Related commands: display mac-authentication.
Examples
# Clear MAC authentication statistics on GigabitEthernet 1/0/1.
<Sysname> reset mac-authentication statistics interface gigabitethernet 1/0/1
125