Sa Duration; Time-Out - HP 5120 SI series Command Reference Manual

sa duration

Syntax
sa duration seconds
undo sa duration
View
IKE proposal view
Default level
2: System level
Parameters
Seconds: Specifies the ISAKMP SA lifetime in seconds, in the range 60 to 604800.
Description
Use the sa duration command to set the ISAKMP SA lifetime for an IKE proposal.
Use the undo sa duration command to restore the default.
By default, the ISAKMP SA lifetime is 86400 seconds.
Before an SA expires, IKE negotiates a new SA. The new SA takes effect immediately after being set up,
and the old one will be cleared automatically when it expires.
Related commands: ike proposal and display ike proposal.
Examples
# Specify the ISAKMP SA lifetime for IKE proposal 10 as 600 seconds (10 minutes).
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10] sa duration 600

time-out

Syntax
time-out time-out
undo time-out
View
IKE DPD view
Default level
2: System level
Parameters
time-out: DPD packet retransmission interval in seconds, in the range 1 to 60.
Description
Use the time-out command to set the DPD packet retransmission interval for a DPD detector.
Use the undo time-out command to restore the default.
The default DPD packet retransmission interval is 5 seconds.
374