Display Portal Local-Server - HP 5120 SI series Command Reference Manual

Table 14 Output description
Field
Portal configuration of interface
IPv4
IPv6
Status
Portal server
Authentication type
Authentication domain
Authentication network
Source IP
Mask
Prefix length

display portal local-server

Syntax
display portal local-server [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal local-server command to display configuration information about the local portal
server, including the supported protocol type, and the referenced SSL server policy.
Related commands: portal local-server.
Examples
# Display configuration information about the local portal server.
Description
Portal configuration on the interface
IPv4 portal configuration
IPv6 portal configuration
Status of the portal authentication on the interface:
•
Portal disabled—Portal authentication is disabled.
•
Portal enabled—Portal authentication is enabled but is not functioning.
•
Portal running—Portal authentication is functioning.
Portal server referenced by the interface
Authentication mode enabled on the interface
Mandatory authentication domain of the interface
Information of the portal authentication subnet
IP address of the portal authentication source subnet
Subnet mask of the IP address of the portal authentication subnet
Prefix length of the IPv6 address of the portal authentication subnet
135