HP 5120 SI series Command Reference Manual page 29

View
Any view
Default level
1: Monitor level
Parameters
access-type: Specifies the user connections of the specified access type.
dot1x: Indicates 802.1X authentication.
•
mac-authentication: Indicates MAC address authentication.
•
portal: Indicates portal authentication.
•
domain isp-name: Specifies all user connections of an ISP domain. The isp-name argument refers to the
name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies user connections on an interface by the interface
type and number.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format
H-H-H.
ucibindex ucib-index: Specifies all user connections using the specified connection index. The value
ranges from 0 to 4294967295.
user-name user-name: Specifies the user connections that use the username. The user-name argument is
a case-sensitive string of 1 to 80 characters. For a username entered without a domain name, the system
assumes that the user is in the default domain name or the mandatory authentication domain.
vlan vlan-id: Specifies user connections of a VLAN, with vlan-id ranging from 1 to 4094.
slot slot-number: Specifies the member number of the device in the IRF, which you can display with the
display irf command. The value range for the slot-number argument depends on the number of members
and numbering conditions in the current IRF. If no IRF exists, the slot-number argument is the current
device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display connection command to display information about AAA user connections.
This command does not display information about FTP user connections.
With no parameter specified, this command displays brief information about all AAA user connections.
If you specify the ucibindex ucib-index combination, this command displays detailed information;
otherwise, this command displays brief information.
If an interface is configured with a mandatory authentication domain (for example, an 802.1X
mandatory authentication domain), users accessing the interface through the specified access type are
18