HP 5120 SI series Command Reference Manual page 128

the max allowed user number is 1024 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent Mac User info:
MAC Addr
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Max number of on-line users is 256
Current online user number is 0
MAC Addr Authenticate state
......(output omitted)
Table 10 Output description
Field
MAC address authentication is enabled
User name format is MAC address in lowercase,
like xxxxxxxxxxxx
Fixed username:
Fixed password:
Offline detect period
Quiet period
Server response timeout value
the max allowed user number
Current user number amounts to
Current domain: not configured, use default
domain
From Port
Description
Whether MAC authentication is enabled
T Type of user account, which can be MAC-based or
shared.
•
If MAC-based accounts are used, this field displays
"User name format is MAC address..." and the format
settings for usernames and passwords. For example,
MAC addresses without hyphens in lower case.
•
If a shared account is used, this field displays "User
name format is fixed account."
Username of the shared account for MAC authentication
users. If MAC-based accounts are used, this field displays
mac.
Password of the shared account for MAC authentication
users.
•
If MAC-based accounts are used or if a shared
account is used but no password is configured, this
field displays not configured.
•
If a shared account is used and a password is
configured, this field displays ******.
Setting of the offline detect timer
Setting of the quiet timer
Setting of the server timeout timer
Maximum number of users each slot in the device
supports
Number of online users
Authentication domain that is currently used
117
Port Index
AuthIndex