Ike Dpd; Ike Local-Name - HP 5120 SI series Command Reference Manual

In main mode, only the ID type of IP address can be used in IKE negotiation and SA creation.
Related commands: local-name, ike local-name, remote-name, remote-address, local-address, and
exchange-mode.
Examples
# Use the ID type of name during IKE negotiation.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] id-type name

ike dpd

Syntax
ike dpd dpd-name
undo ike dpd dpd-name
View
System view
Default level
2: System level
Parameters
dpd-name: Name for the dead peer detection (DPD) detector, a string of 1 to 32 characters.
Description
Use the ike dpd command to create a DPD detector and enter IKE DPD view.
Use the undo ike dpd command to remove a DPD detector.
Related commands: display ike dpd, interval-time, and time-out.
Examples
# Create a DPD detector named dpd2.
<Sysname> system-view
[Sysname] ike dpd dpd2

ike local-name

Syntax
ike local-name name
undo ike local-name
View
System view
Default level
2: System level
362