HP 5120 SI series Command Reference Manual page 41

number of members and numbering conditions in the current IRF virtual device. If no IRF virtual device
exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display local-user command to display information about local users.
Related commands: local-user.
Examples
# Display the information of local user bbb on slot 1.
<Sysname> display local-user user-name bbb slot 1
Slot: 1
The contents of local user bbb:
State:
ServiceType:
Access-limit:
Max AccessNum:
User-group:
Bind attributes:
IP address:
Bind location:
MAC address:
Vlan ID:
Authorization attributes:
Idle TimeOut:
Work Directory:
User Privilege:
Acl ID:
Vlan ID:
User Profile:
Expiration date:
Password-Aging:
Password-Length:
Password-Composition:
Total 1 local user(s) matched.
Table 3 Output description
Field
Slot
State
Active
ftp
Enable Current AccessNum: 0
300
system
1.2.3.4
1/4/1 (SLOT/SUBSLOT/PORT)
0001-0002-0003
100
10(min)
flash:/
3
2000
100
prof1
12:12:12-2018/09/16
Enabled(30 day(s))
Enabled(4 characters)
Enabled(4 type(s),
Description
IRF member ID
Status of the local user, Active or Block
30
2 character(s) per type)