Mac-Authentication Max-User; Mac-Authentication Timer - HP 5120 SI series Command Reference Manual

Examples
# Configure VLAN 5 as the MAC authentication guest VLAN on port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication guest-vlan 5

mac-authentication max-user

Syntax
mac-authentication max-user user-number
undo mac-authentication max-user
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
user-number: Specifies the maximum number of concurrent MAC authentication users allowed on the port.
The value ranges from 1 to 256.
Parameters
Use the mac-authentication max-user command to set the maximum number of concurrent MAC
authentication users on a port.
Use the undo mac-authentication max-user command to restore the default.
The default maximum number of concurrent MAC authentication users allowed on a port is 256.
Examples
# Configure port GigabitEthernet 1/0/1 to allow up to 32 concurrent MAC authentication users.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication max-user 32

mac-authentication timer

Syntax
mac-authentication timer { offline-detect offline-detect-value | quiet quiet-value | server-timeout
server-timeout-value }
undo mac-authentication timer { offline-detect | quiet | server-timeout }
View
System view
Default level
2: System level
122