HP 5120 SI series Command Reference Manual page 30

treated as users in the mandatory authentication domain. To display connections of such users, specify
the mandatory authentication domain for the display connection domain isp-name command.
For 802.1X users whose usernames use a forward slash (/) or backward slash (\) as the domain name
delimiter, you cannot query the connections by username. For example, the display connection
user-name aaa\bbb command cannot display the connections of the user aaa\bbb.
Related commands: cut connection.
Examples
# Display information about all AAA user connections.
<Sysname> display connection
Slot: 1
Index=0
IP=10.0.0.1
IPv6=N/A
Total 1 connection(s) matched on slot 1.
Total 1 connection(s) matched.
# Display information about AAA user connections using the index of 0.
<Sysname> display connection ucibindex 0
Slot: 0
Index=0
IP=10.0.0.1
IPv6=N/A
Access=Admin
Port Type=Virtual ,Port Name=N/A
Initial VLAN=999, Authorized VLAN=20
ACL Group=Disable
User Profile=N/A
CAR=Disable
Priority=Disable
Start=2011-01-16 10:53:03 ,Current=2011-01-16 10:57:06 ,Online=00h04m03s
Total 1 connection matched.
Slot: 1
Total 0 connection matched.
Slot: 2
Total 0 connection matched.
Table 1 Output description
Field
Username
IP
IPv6
Access
ACL Group
, Username=telnet@system
, Username=telnet@system
,AuthMethod=PAP
Description
Username of the connection, in the format
username@domain
IPv4 address of the user
IPv6 address of the user
User access type
Authorization ACL group. Disable means no
authorization ACL group is assigned.
19