HP 5120 SI series Command Reference Manual page 52

If no IRF member ID is specified, the command will display the configuration information of the RADIUS
schemes on all members of an IRF virtual device.
Related commands: radius scheme.
Examples
# Display the configuration information of all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName
Index : 0
Primary Auth Server:
IP: 1.1.1.1
Encryption Key : ******
Probe username : test
Probe interval : 60 min
Primary Acct Server:
IP: 1.1.1.1
Encryption Key : ******
Second Auth Server:
IP: 1.1.2.1
Encryption Key : N/A
IP: 1.1.3.1
Encryption Key : N/A
Probe username : test
Probe interval : 60 min
Second Acct Server:
IP: 1.1.2.1
Encryption Key : N/A
Probe username : test
Probe interval : 60 min
Auth Server Encryption Key : ******
Acct Server Encryption Key : N/A
Accounting-On packet disable, send times : 5 , interval : 3s
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime accounting(minute)
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
NAS-IP address
Attribute 25
------------------------------------------------------------------
Total 1 RADIUS scheme(s).
: radius1
Type : extended
Port: 1812
Port: 1813
Port: 1812
Port: 1812
Port: 1813
41
State: active
State: active
State: active
State: active
State: block
: 3
: 3
: 12
: 5
: 500
: 5
: without-domain
: Byte
: one
: 1.1.1.1
: car