2
Scope of supply
3
Field of application and notes on use
4
Structure and function
6
S KMR
S 2 hardened washers as force introduction parts
S Mounting instructions
The KMR are designed to measure static and dynamic
compressive forces, and are especially suitable for the
monitoring of forces, e.g. with production processes or
bolted connections. Furthermore, they are used in the
food industry, for example.
The IP67 degree of protection also permits outdoor
measurements to be taken.
4.1
Measuring element
The KMR have been designed as welded construction
and are completely made from corrosion‐resistant,
hardened steel. They can be mounted in any position.
In the measuring element, strain gauges are connected
to form a Wheatstone bridge. The balancing elements
are located in the cable end.
Therefore, do in no case shorten the cable.
KMR
A2114-1.1_en/de