Scope Of Supply; Application - HBM T10FM Mounting Instructions

T10FM
1

Scope of supply

 Rotor
 Stator
 Mounting instructions
 Test record
 Optional: Speed kit (slotted disc, screwdriver, screw locking device,
screws)
2

Application

The T10FM torque flanges record static and dynamic torque on stationary or
rotating shafts and determine the speed, specifying the direction of rotation.
Test beds can be extremely compact because of their extremely short
construction. They therefore offer a very wide range of applications.
In addition to conventional test‐bench engineering (engine, roll and
transmission test benches), new solutions are possible for torque
measurements partly integrated in the machines.
Thanks to the bearing‐free design and the contactless transmission of
excitation voltage and measured values, the torque measuring system of
torque flanges requires no maintenance. Thus there are no friction or bearings
heating effects.
The torque flanges are supplied for nominal (rated) torques from 15 kNm to
80 kNm. Depending on the nominal torque, maximum speeds of up to 6000
-1
min are permissible.
T10FM torque flanges are reliably protected against electromagnetic
interference. They have been tested with regard to EMC according to the
relevant European standards, and carry the CE mark.
A0894-5.2 en
9
HBM