Mounting The Rotational Speed Flange - HBM T40S7 Mounting Instructions

Mechanical installation
5.8 Mounting the rotational speed flange (rotational speed
measuring system only)
The rotational speed disc (intermediate flange) is ready-mounted on the rotor at
the factory, with two (M4) screws.
Sensor head
for measuring
rotational
speed
Sensor head
for reference
signal
Fig. 5.10 Torque transducer with rotational speed measurement, optional reference
signal, Option 6, Code A
Notice
The two (M4) screws are only used to fix the rotational speed disc. The meas­
urement flange and the attached speed measuring system may therefore be
rotated only after mounting.
30
Rotational speed disc
M4 fixing screws
A3276-11.0 HBM: public
T40FM