Figure 266: Configuring Local Snmpv3 Users - Edge-Core ECS4620-28T Quick Start Manual

Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
Web Interface
To configure a local SNMPv3 user:
1.
Click Administration, SNMP.
2.
Select Configure User from the Step list.
3.
Select Add SNMPv3 Local User from the Action list.
4.
Enter a name and assign it to a group. If the security model is set to SNMPv3
and the security level is authNoPriv or authPriv, then an authentication
protocol and password must be specified. If the security level is authPriv, a
privacy password must also be specified.
5.
Click Apply

Figure 266: Configuring Local SNMPv3 Users

To show local SNMPv3 users:
1.
Click Administration, SNMP.
2.
Select Configure User from the Step list.
3.
Select Show SNMPv3 Local User from the Action list.
– 436 –