Edge-Core ECS4620-28T Quick Start Manual page 521

28/52-port l3 stackable gigabit ethernet switch

Hide thumbs Also See for ECS4620-28T:

Table of Contents

Displaying Details

Use the Administration > CFM > Show Information (Show Local MEP Details) page

to show detailed CFM information about a local MEP in the continuity check

for Local MEPs

These parameters are displayed:

MD Index – Domain index. (Range: 1-65535)

MA Index – MA identifier. (Range: 1-2147483647)

MEP ID – Maintenance end point identifier. (Range: 1-8191)

MD Name – The maintenance domain for this entry.

MA Name – Maintenance association to which this remote MEP belongs.

MA Name Format – The format of the Maintenance Association name,

Character String or ICC Based

Level – Maintenance level of the local maintenance point.

Direction – The direction in which the MEP faces on the Bridge port (up or

Interface – The port to which this MEP is attached.

CC Status – Shows if the MEP will generate CCM messages.

MAC Address – MAC address of the local maintenance point. (If a CCM for the

specified remote MEP has never been received or the local MEP record times

out, the address will be set to the initial value of all Fs.)

Defect Condition – Shows the defect detected on the MEP.

Received RDI – Receive status of remote defect indication (RDI) messages on

AIS Status – Shows if MEPs within the specified MA are enabled to send frames

with AIS information following detection of defect conditions.

AIS Period – The interval at which AIS information is sent.

AIS Transmit Level – The maintenance level at which AIS information will be

sent for the specified MEP.

Suppress Alarm – Shows if the specified MEP is configured to suppress

sending frames containing AIS information following the detection of defect

| Basic Administration Protocols

Connectivity Fault Management

Show Quick Links

Chapters

Table of Contents