Figure 115: Configuring Global Settings For Sta (Mstp) - Edge-Core ECS4620-28T Quick Start Manual

28/52-port l3 stackable gigabit ethernet switch

Hide thumbs Also See for ECS4620-28T:

Table of Contents

| Spanning Tree Algorithm

Displaying Global Settings for STA

Figure 115: Configuring Global Settings for STA (MSTP)

Use the Spanning Tree > STA (Configure Global - Show Information) page to display

a summary of the current bridge STA information that applies to the entire switch.

The parameters displayed are described in the preceding section, except for the

following items:

Bridge ID – A unique identifier for this bridge, consisting of the bridge priority,

the MST Instance ID 0 for the Common Spanning Tree when spanning tree type

is set to MSTP, and MAC address (where the address is taken from the switch

Designated Root – The priority and MAC address of the device in the Spanning

Tree that this switch has accepted as the root device.

Root Port – The number of the port on this switch that is closest to the root.

This switch communicates with the root device through this port. If there is no

Show Quick Links

Table of Contents