Configuring Local Snmpv3 Users - Edge-Core ES3510MA Management Manual

8-port layer 2 fast ethernet switch

Hide thumbs Also See for ES3510MA:

Table of Contents

Use the Administration > SNMP (Configure User - Add SNMPv3 Local User)

page to authorize management access for SNMPv3 clients, or to identify

the source of SNMPv3 trap messages sent from the local switch. Each

SNMPv3 user is defined by a unique name. Users must be configured with a

specific security level and assigned to a group. The SNMPv3 group restricts

users to a specific read, write, and notify view.

"snmp-server user" on page 565

These parameters are displayed:

User Name – The name of user connecting to the SNMP agent.

(Range: 1-32 characters)

Group Name – The name of the SNMP group to which the user is

assigned. (Range: 1-32 characters)

Security Model – The user security model; SNMP v1, v2c or v3.

Security Level – The following security levels are only used for the

groups assigned to the SNMP security model:

noAuthNoPriv – There is no authentication or encryption used in

SNMP communications. (This is the default security level.)

AuthNoPriv – SNMP communications use authentication, but the

data is not encrypted.

AuthPriv – SNMP communications use both authentication and

Authentication Protocol – The method used for user authentication.

(Options: MD5, SHA; Default: MD5)

Authentication Password – A minimum of eight plain text characters

is required.

Privacy Protocol – The encryption algorithm use for data privacy;

only 56-bit DES is currently available.

Privacy Password – A minimum of eight plain text characters is

| Basic Administration Protocols

Simple Network Management Protocol

Show Quick Links

Chapters

Table of Contents