Chapter 13
| Basic Administration Protocols
Switch Clustering
Managing Cluster
Members
To show cluster candidates:
1.
Click Administration, Cluster.
2.
Select Configure Member from the Step list.
3.
Select Show Candidate from the Action list.
Figure 290: Showing Cluster Candidates
Use the Administration > Cluster (Show Member) page to manage another switch
in the cluster.
Parameters
These parameters are displayed:
◆
Member ID – The ID number of the Member switch. (Range: 1-36)
◆
Role – Indicates the current status of the switch in the cluster.
◆
IP Address – The internal cluster IP address assigned to the Member switch.
◆
MAC Address – The MAC address of the Member switch.
◆
Description – The system description string of the Member switch.
◆
Operate – Remotely manage a cluster member.
– 462 –